เพิ่ม “FLUKE TP220 Industrial Test Probes 12mm stainless steel tip for use with TL222,TL224” ในตะกร้าเรียบร้อย ดูตะกร้าสินค้า/ขอใบเสนอราคา
-5%Sold out
สินค้าในกลุ่มนี้ทั้งหมด
FLUKE CIQ-100 CableIQ Qualification Tester with Remote Adapter Supported Cable: UTP,RG6,RG59
฿86,135.00 Original price was: ฿86,135.00.฿73,215.00Current price is: ฿73,215.00. รวมภาษีมูลค่าเพิ่มแล้ว
FLUKE DSX-600-PRO Cable Analyzer Cat3/Class C through CAT6A/Class EA Test Standards by IEEE802.3 10BASE-T,100BASE-TX, 1000BASE-T,10GBASE-T
฿413,020.00 Original price was: ฿413,020.00.฿371,718.00Current price is: ฿371,718.00. รวมภาษีมูลค่าเพิ่มแล้ว
FLUKE MT-8200-63A IntelliTone Pro 200 LAN Probe, Locate and Isolate Cabling,Verify Conductor Continuity with Cablemap
รหัสสินค้า: MT-8200-63A฿9,095.00 Original price was: ฿9,095.00.฿8,640.00Current price is: ฿8,640.00. รวมภาษีมูลค่าเพิ่มแล้ว
โปรดติดต่อเราเพื่อสั่งซื้อ
สินค้าหมดแล้ว
| Unit | Pc. |
รหัสสินค้า:
MT-8200-63A
หมวดหมู่: เครื่องมือวัดละเอียด
ป้ายกำกับ: FLUKE, Toner and Probe, เครื่องมือวัดละเอียด
Documents
สินค้าที่เกี่ยวข้อง
FLUKE 80K-6 High Voltage Probe ,Intended for Low Energy Application
SKU:
80K-6
FLUKE 80PK-1 General Purpose Bead Probes, Measurement range -40°C to 260°C No suitable for liquid immersion.
SKU:
80PK-1
FLUKE TL71 Premium Test Lead Set with Protective Caps Silicone Insulated, Right Angle Test Leads CAT III 1000V and CAT IV 600V
SKU:
TL71
FLUKE TL224 Suregrip Silicone Insulated Test Leads, 1.5m Silicone-Insulated Wire Resist Heat and Cold Superior Staring Relief, CAT III 1000V, 10A
SKU:
TL224
FLUKE 80I-110S AC/DC Current clamp,compatible with any Fluke ScopeMeter Test Tool,Current Range: 0.1 to 100ADC or 0.1 to 70AAC,
SKU:
80I-110S
FLUKE TP88 Rigid Back Probe Pins,Slides onto Test probes measuring 2mm,Tested to 60VDC, A sharp point ensures good contact to the electrical connector
SKU:
TP88
FLUKE 80T-150UA Universal Temperature Probe Output 1mV°C Measurement range: -50 to 150°C Compatible with Fluke DMMs
SKU:
80T-150UA
FLUKE PM9082/001 Dual Banana Jack Female to Male BNC Adapter 4mm Banana Contact Adapter, for Fluke 190 and 90 Series Scopemeter
SKU:
PM9082/001















