| Category | Portable gas detector |
|---|---|
| Type | Single gas |
| Detection gas | Toxic |
| Principle of detection | Electrochemical |
| Sampling method | Diffusion |
| Display of alarm | Flashing light, Buzzer, Vibration |
| Explosion protected construction | Intrinsically safe |
| Approvals | CSA, C/US |
| Power source | Alkaline batteries (Size AA) 2 pcs |
| Battery life | More than 250 hours (at 25℃, no alarm) |
| Dimensions | 63(W) x 131(H) x 31(D) mm, without sensor top |
| Weight | Approx. 215g<br>Including: alligator clip and rubber protector (excluding Alkaline batteries) |
| Operating temperature range | -20℃ to 50℃ |
| Operating humidity range | Below 95%RH (Non-condensing) |
เพิ่ม “FLUKE 80PK-25 Type-K thermocouple suitable for food industry, liquids and gels Measurement range: -40°C to 350°C” ในตะกร้าเรียบร้อย ดูตะกร้าสินค้า/ขอใบเสนอราคา
Sold out
สินค้าในกลุ่มนี้ทั้งหมด
RIKEN KEIKI Portable Gas Leak Checker Model : SP-220 series
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Portable Gas Detector Model : GX-6000
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Single Toxic Gas Monitor Model : SC-01
รหัสสินค้า: SC-01฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
โปรดติดต่อเราเพื่อสั่งซื้อ
สินค้าหมดแล้ว
RIKEN KEIKI
Smart interchangeable sensors
Remote monitor capability by optional extender cable (3m)
Compact and light weight 63W x 131H x 31Dmm, 215g
250 hours of continuous operation
Operates on 2 "AA" alkaline batteries
รหัสสินค้า:
SC-01
หมวดหมู่: เครื่องมือวัดละเอียด
ป้ายกำกับ: RIKEN KEIKI, เครื่องมือตรวจจับแก๊ส, เครื่องมือวัดละเอียด
คำอธิบาย
Documents
สินค้าที่เกี่ยวข้อง
FLUKE 80K-40 High Voltage Probe that allows a multimeter to measure up to 40,000V. Intended for low energy application only.
SKU:
80K-40
FLUKE AC285 Suregrip Large Alligator Clip, Multi-Purpose Tooth Pattern Grips Anything Maximum 3/4inches
SKU:
AC285
FLUKE TL224 Suregrip Silicone Insulated Test Leads, 1.5m Silicone-Insulated Wire Resist Heat and Cold Superior Staring Relief, CAT III 1000V, 10A
SKU:
TL224
FLUKE 80I-110S AC/DC Current clamp,compatible with any Fluke ScopeMeter Test Tool,Current Range: 0.1 to 100ADC or 0.1 to 70AAC,
SKU:
80I-110S
FLUKE TP88 Rigid Back Probe Pins,Slides onto Test probes measuring 2mm,Tested to 60VDC, A sharp point ensures good contact to the electrical connector
SKU:
TP88
FLUKE TLK225 SureGrip Master Accessory Set Kit includes all the SureGrip leads and probes
SKU:
TLK225
FLUKE PM9082/001 Dual Banana Jack Female to Male BNC Adapter 4mm Banana Contact Adapter, for Fluke 190 and 90 Series Scopemeter
SKU:
PM9082/001
FLUKE TL27 Heavy Duty Test Lead Set, Digital Multimeter test lead with safety shrouded Heavy duty EPDM Insulation, Length 1.5m
SKU:
TL27















