| Category | Fixed Gas Detector |
|---|---|
| Type | Detector Head |
| Principle of detection | Catalytic combustion |
| Detection range | 0 – 100%LEL |
| Sampling method | Direct insertion type |
| Explosion protected construction | Flameproof enclosure |
| Explosion-proof class | IECEx : Ex db IIC T3 Gb ATEX : II2G Ex db IIC T3 Gb |
| Approvals | IECEx / ATEX / Japan Ex / CE marking |
| Power source | 24VDC±10% |
| Dimensions | Main body : Approx. 148 (W) x 167 (H) x 458 (D) mm Insert part : Approx. φ34 x 250 mm |
| Weight | Approx. 4.6kg |
| Operating temperature range | Main body: 0 to 50 ℃ (no sudden changes) Insert part: 0 to 160℃ (no sudden changes) |
เพิ่ม “FLUKE 80K-40 High Voltage Probe that allows a multimeter to measure up to 40,000V. Intended for low energy application only.” ในตะกร้าเรียบร้อย ดูตะกร้าสินค้า/ขอใบเสนอราคา
Sold out
สินค้าในกลุ่มนี้ทั้งหมด
RIKEN KEIKI Fixed Gas Detector Model : SD-2600
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Fixed Gas Detector Model : RI-257
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Fixed Gas Detector Model : SD-2500
รหัสสินค้า: SD-2500฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
โปรดติดต่อเราเพื่อสั่งซื้อ
สินค้าหมดแล้ว
RIKEN KEIKI
・High boiling point solvent can be detected.
・Operating in high temp. 0 to 160℃.
・Concentration display part is integrated to the main body.
・Simple operation only to touch of control key for adjustment.
รหัสสินค้า:
SD-2500
หมวดหมู่: เครื่องมือวัดละเอียด
ป้ายกำกับ: RIKEN KEIKI, เครื่องมือตรวจจับแก๊ส, เครื่องมือวัดละเอียด
คำอธิบาย
Documents
สินค้าที่เกี่ยวข้อง
FLUKE C25 Large Soft Case for Digital Multimeters, Made of Vinyl, Dimensions: 205x90x72mm.
SKU:
C25
FLUKE TL75 Hard Point Test Lead Set with Protective Caps 48 inches PVC Insulated Right-Angle Test Leads Shrouded Banana Plugs ,CAT II 1000V, 10A Rating
SKU:
TL75
FLUKE TL224 Suregrip Silicone Insulated Test Leads, 1.5m Silicone-Insulated Wire Resist Heat and Cold Superior Staring Relief, CAT III 1000V, 10A
SKU:
TL224
FLUKE AC280 SureGrip Hook Clips for use with TL222 and TL224 test leads
SKU:
AC283
FLUKE TP88 Rigid Back Probe Pins,Slides onto Test probes measuring 2mm,Tested to 60VDC, A sharp point ensures good contact to the electrical connector
SKU:
TP88
FLUKE C280 Soft Case for FLUKE 287 and 289 Digital Multimeter Includes detachable
SKU:
C280
FLUKE I2000 FLEX AC Current Probe 20A,200A, 2000A Switch Selectable Max. Conductor Diameter 178mm Required 2xAA Battery
SKU:
I2000 FLEX
FLUKE 80T-150UA Universal Temperature Probe Output 1mV°C Measurement range: -50 to 150°C Compatible with Fluke DMMs
SKU:
80T-150UA















