| Category | Fixed Gas Detector |
|---|---|
| Detection gas | C4F6 / C5F8 / COS |
| Principle of detection | Electrochemical+Pyrolysis (catalyst) |
| Detection range | 0-5ppm (C4F6)(C5F8) 0-15ppm (COS) |
| Alarm setpoints | 1st 2ppm / 2nd 4ppm (C4F6)(C5F8) 1st 5ppm / 2nd 10ppm (COS) |
| Sampling method | Sample draw |
| Display of alarm | Flashing light / Lighting |
| Dimensions | Approx. 180 (W) x 225 (H) x 285 (D) mm (excluding projections) |
| Weight | Approx. 6.0kg |
| Operating temperature range | 20℃ to 40℃ (no sudden changes) |
| Operating humidity range | 40 to 70%RH (no condensation) |
เพิ่ม “FLUKE 80K-40 High Voltage Probe that allows a multimeter to measure up to 40,000V. Intended for low energy application only.” ในตะกร้าเรียบร้อย ดูตะกร้าสินค้า/ขอใบเสนอราคา
Sold out
สินค้าในกลุ่มนี้ทั้งหมด
RIKEN KEIKI Fixed Gas Detector Model : EC-600
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Fixed Gas Detector Model : FI-915
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Smart type gas detector head Model : TP-70DGII
รหัสสินค้า: TP-70DGII฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
โปรดติดต่อเราเพื่อสั่งซื้อ
สินค้าหมดแล้ว
RIKEN KEIKI
・Influence of interference is reduced by adopting the pyrolyzer with catalyst.
・New intelligent sensor equipped.
・Automatic flow rate adjusting function installed.
รหัสสินค้า:
TP-70DGII
หมวดหมู่: เครื่องมือวัดละเอียด
ป้ายกำกับ: RIKEN KEIKI, เครื่องมือตรวจจับแก๊ส, เครื่องมือวัดละเอียด
คำอธิบาย
Documents
สินค้าที่เกี่ยวข้อง
FLUKE 80K-6 High Voltage Probe ,Intended for Low Energy Application
SKU:
80K-6
FLUKE TP220 Industrial Test Probes 12mm stainless steel tip for use with TL222,TL224
SKU:
TP220
FLUKE 80I-110S AC/DC Current clamp,compatible with any Fluke ScopeMeter Test Tool,Current Range: 0.1 to 100ADC or 0.1 to 70AAC,
SKU:
80I-110S
FLUKE TP88 Rigid Back Probe Pins,Slides onto Test probes measuring 2mm,Tested to 60VDC, A sharp point ensures good contact to the electrical connector
SKU:
TP88
FLUKE 80PK-26 Type-K Tapered Temperature Probe range 40°C to 816°C
SKU:
80PK-26
FLUKE I30 Hall Effect Technology AC/DC Current Clamp
SKU:
I30
FLUKE I2000 FLEX AC Current Probe 20A,200A, 2000A Switch Selectable Max. Conductor Diameter 178mm Required 2xAA Battery
SKU:
I2000 FLEX
FLUKE TL27 Heavy Duty Test Lead Set, Digital Multimeter test lead with safety shrouded Heavy duty EPDM Insulation, Length 1.5m
SKU:
TL27















