| Category | Fixed Gas Detector |
|---|---|
| Detection gas | C4F6 / C5F8 / COS |
| Principle of detection | Electrochemical+Pyrolysis (catalyst) |
| Detection range | 0-5ppm (C4F6)(C5F8) 0-15ppm (COS) |
| Alarm setpoints | 1st 2ppm / 2nd 4ppm (C4F6)(C5F8) 1st 5ppm / 2nd 10ppm (COS) |
| Sampling method | Sample draw |
| Display of alarm | Flashing light / Lighting |
| Dimensions | Approx. 180 (W) x 225 (H) x 285 (D) mm (excluding projections) |
| Weight | Approx. 6.0kg |
| Operating temperature range | 20℃ to 40℃ (no sudden changes) |
| Operating humidity range | 40 to 70%RH (no condensation) |
เพิ่ม “FLUKE 80AK-A Thermocouple Adaptor, Adapt Type-K Thermocouple mini-connector to dual banana plug” ในตะกร้าเรียบร้อย ดูตะกร้าสินค้า/ขอใบเสนอราคา
Sold out
สินค้าในกลุ่มนี้ทั้งหมด
RIKEN KEIKI Fixed Gas Detector Model : EC-600
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Fixed Gas Detector Model : FI-915
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Smart type gas detector head Model : TP-70DGII
รหัสสินค้า: TP-70DGII฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
โปรดติดต่อเราเพื่อสั่งซื้อ
สินค้าหมดแล้ว
RIKEN KEIKI
・Influence of interference is reduced by adopting the pyrolyzer with catalyst.
・New intelligent sensor equipped.
・Automatic flow rate adjusting function installed.
รหัสสินค้า:
TP-70DGII
หมวดหมู่: เครื่องมือวัดละเอียด
ป้ายกำกับ: RIKEN KEIKI, เครื่องมือตรวจจับแก๊ส, เครื่องมือวัดละเอียด
คำอธิบาย
Documents
สินค้าที่เกี่ยวข้อง
FLUKE 80K-6 High Voltage Probe ,Intended for Low Energy Application
SKU:
80K-6
FLUKE TL75 Hard Point Test Lead Set with Protective Caps 48 inches PVC Insulated Right-Angle Test Leads Shrouded Banana Plugs ,CAT II 1000V, 10A Rating
SKU:
TL75
FLUKE AC285 Suregrip Large Alligator Clip, Multi-Purpose Tooth Pattern Grips Anything Maximum 3/4inches
SKU:
AC285
FLUKE TL224 Suregrip Silicone Insulated Test Leads, 1.5m Silicone-Insulated Wire Resist Heat and Cold Superior Staring Relief, CAT III 1000V, 10A
SKU:
TL224
FLUKE 80I-110S AC/DC Current clamp,compatible with any Fluke ScopeMeter Test Tool,Current Range: 0.1 to 100ADC or 0.1 to 70AAC,
SKU:
80I-110S
FLUKE 80BK-A Integrated Digital Multimeter Probe, Type-K Thermocouple with Standard Banana Jack, Measurement Range: -40°C to 260°C
SKU:
80BK-A
FLUKE TP88 Rigid Back Probe Pins,Slides onto Test probes measuring 2mm,Tested to 60VDC, A sharp point ensures good contact to the electrical connector
SKU:
TP88
FLUKE TP165X Test Probe with Remote Test Button for use with Fluke1577, Fluke1587 Insulation Meter
SKU:
TP165X















