| Category | Portable gas detector |
|---|---|
| Type | Single gas |
| Detection gas | Hydrogen Sulfide |
| Principle of detection | Electrochemical |
| Detection range | 0-100.0ppm (0.5ppm) |
| Sampling method | Diffusion |
| Display of alarm | Flashing light, Buzzer, Vibration |
| Explosion protected construction | Intrinsically safe |
| IP rating | IP67 |
| Approvals | ATEX, IECEx, CE |
| Power source | Alkaline battery 2-AAA size Optional: Ni-MH battery pack |
| Battery life | Alkaline battery: Approx. 3000 hours Ni-MH battery: Approx. 2000 hours |
| Dimensions | 57(W) x 70(H) x 26(D) mm |
| Weight | Approx. 80g |
| Operating temperature range | -20 to 50℃ |
| Operating humidity range | 16 to 85%RH |
เพิ่ม “FLUKE 80PK-1 General Purpose Bead Probes, Measurement range -40°C to 260°C No suitable for liquid immersion.” ในตะกร้าเรียบร้อย ดูตะกร้าสินค้า/ขอใบเสนอราคา
Sold out
สินค้าในกลุ่มนี้ทั้งหมด
RIKEN KEIKI Pump unit Model : RP-3R / RP-3R(Pro)
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
Personal Single Gas Monitor Model : GP-03
฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
RIKEN KEIKI Personal Single Gas Monitor Model : HS-03
รหัสสินค้า: HS-03฿0.00 รวมภาษีมูลค่าเพิ่มแล้ว
โปรดติดต่อเราเพื่อสั่งซื้อ
สินค้าหมดแล้ว
RIKEN KEIKI
Sensor, filter, and battery are replaceable.
Robust waterproof design and intrinsically safety rating make the 03 series the ideal gas monitor for many hazardous applications.
รหัสสินค้า:
HS-03
หมวดหมู่: เครื่องมือวัดละเอียด
ป้ายกำกับ: RIKEN KEIKI, เครื่องมือตรวจจับแก๊ส, เครื่องมือวัดละเอียด
คำอธิบาย
Documents
สินค้าที่เกี่ยวข้อง
FLUKE 80K-40 High Voltage Probe that allows a multimeter to measure up to 40,000V. Intended for low energy application only.
SKU:
80K-40
FLUKE 80PK-1 General Purpose Bead Probes, Measurement range -40°C to 260°C No suitable for liquid immersion.
SKU:
80PK-1
FLUKE AC285 Suregrip Large Alligator Clip, Multi-Purpose Tooth Pattern Grips Anything Maximum 3/4inches
SKU:
AC285
FLUKE TL224 Suregrip Silicone Insulated Test Leads, 1.5m Silicone-Insulated Wire Resist Heat and Cold Superior Staring Relief, CAT III 1000V, 10A
SKU:
TL224
FLUKE 80I-110S AC/DC Current clamp,compatible with any Fluke ScopeMeter Test Tool,Current Range: 0.1 to 100ADC or 0.1 to 70AAC,
SKU:
80I-110S
FLUKE 80PK-22 Supergrip Immersion Probe, Type-K Thermocouple for use in Liquids and Gels,Probe Length: 21.6cm Measurement Range: -40°C to 1090°C
SKU:
80PK-22
FLUKE TP88 Rigid Back Probe Pins,Slides onto Test probes measuring 2mm,Tested to 60VDC, A sharp point ensures good contact to the electrical connector
SKU:
TP88
FLUKE TL27 Heavy Duty Test Lead Set, Digital Multimeter test lead with safety shrouded Heavy duty EPDM Insulation, Length 1.5m
SKU:
TL27















